Over the past few months I’ve been thinking that I really should get some more exercise. One of the ways I tended to do that, before I worked at SSE was by Geocaching, however over my time there with the extra time I was spending travelling, plus a lot of other demands on my time our caching trips generally reverted to being on holiday only.
A couple years back I wrote about the lack of UK topographic maps from Garmin, and discussed a way around the problem. However since then, Garmin have addressed the problem with the release of Mapsource GB Topo – although subject to a number of limitations as to what the user could do with the Ordnance Survey data it contained. However it didn’t particularly help me, as it was only supported on the newer generation of eTrex units, not my first generation eTrex Vista. Anyway, since we were only really Geocaching on holiday, and Topo Canada worked fine on my old GPS, it didn’t really bother me much.
With the decision to get some more exercise, I took a look at doing some more UK Geocaching, and came across a whole raft of special offers at GPS Warehouse, including a bundle containing the latest generation eTrex Vista Cx, and a copy of GB Topo too. I couldn’t resist and put my order in. It has to be said that there was a worrying moment or two, as in the past packages from them have arrived the next day, and this one took a few days to despatch, but anyway, the new GPS arrived this week. Incidentally, if you look down the list of offers, there is quite a range, including a number of cheaper packages, however I opted for an eTrex Vista again because it includes the electronic compass. Whilst it is possible to go Geocaching with a unit without this, personally I’ve always found it is better to have a unit that correctly reads the direction in which you are facing when you are stood still – the other units, that base the direction on the direction of last movement are a bit more of a pain, especially close to the cache. However if you want a cheap and rugged GPS to get started, you can’t go wrong with the classic yellow eTrex – which you can currently pick up for Â£69.99 from GPS Warehouse.
Unpacking my new eTrex Vista, it was a slight case of same yet different. You can see what I mean from the picture – the new unit, although laid out in exactly the same way as the old one is somewhat shorter and fatter than the original, I suspect because the colour screen in the new unit is a more conventional shape for other devices that are using colour screens. Hardware wise, the old style serial port has been replaced with USB – a relief as my laptop doesn’t have a serial port, and the serial to USB cable I have doesn’t like Windows Vista-64. The new eTrex Vista uses exactly the same cable as my Streetpilot i2, and so is quite happy thanks to the 64-bit support from Garmin I discussed recently. Alongside this, the new unit now makes a selection of beeps during operation, including a useful proximity alarm when you get close to a Geocache. Software wise things have moved forwards. There is explicit Geocache support – back when I first started there weren’t even Geocache icons in the default set, these didn’t arrive until a later software update for the units. The unit also takes the same sized microSD memory cards that the Streetpilot i2 takes which is useful, and the software has been expanded to include a routing mode. However I wouldn’t recommend it for road navigation as it lacks the voice directions – it only beeps to tell you of a new instruction, meaning you have to look at the screen to see the next direction. In my opinion, the most important thing for a road navigation unit is good clear spoken instructions as the last thing you should be doing is to take your eyes off the road to look at a little screen – hence what you need is a good reliable unit with spoken instructions and a simple interface, hence why to some peoples surprise I opted for the black and white Streetpilot i2, rather than a more fancy unit.
Anyway, back to the new eTrex Vista. For Geocaching, my requirements are somewhat different. I’ve already mentioned the importance of the electronic compass, but with the colour screen and the topographic maps, alongside the fact that the unit is rugged and fully waterproof, coupled with the small size, it is great for a bit of caching. So this afternoon I took it out for a spin, trying a couple of local caches.
Back when I first went out caching, caches in the UK were few and far between, indeed our Queens Oak cache was the first cache to be placed in Berkshire when it was hidden back in 2001. Now when I pulled the list of the closest 100 caches to home from the site, all the caches were between the line of the M4 and M3! Whereas for a long while our closest caches were our own, just two miles away, there are now twelve caches closer to home than those.
The closest was the microcache, a 35mm film canister hidden close to the path down from White Horse Lane to the village, which as implied by the description on the page, didn’t prove to be too much of a problem to find. One of the things you pick up quite quickly when caching is there are a number of common places people will hide things – indeed one of the reasons I drifted away from caching was due to the repetitive nature of a number of the caches. However it was the first time I’d actually explored this bit of Finchampstead, and I was treated to some quite stunning views across the fields in the late afternoon sun.
Next on my list was Rectory Hollow, which was a much larger box, but also had reports of issues with the co-ordinates. The cache owners had checked several times, and usually got the right co-ordinates when approaching from the north-east – the direction from which I was coming. This one was again alongside a path, but this time the path from the Church that heads down towards the Tally Ho pub and Eversley. Oddly enough, although the GB Topo included the footpath from the Church (or at least from the point where it is only a footpath rather than the access for a couple of houses on the top of the hill, the part of the path on from where it meets the Whitehorse Lane to the Village path is missing – a common problem. According to this discussion (relevant statement is about a third of the way down the fourth page) the problem is down to the quality of the data supplied by the Ordnance Survey. Apparently the vector mapping includes only those paths surveyed by the OS surveyors – paper maps and the raster mapping generated from them include right of way information licensed from local authorities that isn’t licensed here – as the vector mapping is primarily aimed at business who have more interest in urban and city areas, the vector mapping is apparently more accurate there.
Heading down to the cache site, and trying not to look suspicious to the various dog walkers I passed, I actually initially missed the cache site as the proximity alarm for the cache didn’t sound. This was because the co-ordinates placed the cache out in the middle of the adjacent field. I tried moving out from under the trees, and trying again, but the GPS was consistently placing the location in the field, necessitating a more detailed search to try and find the box. Unfortunately I’d hit the time of day when quite a few people were out walking their dogs, so that combined with the problems with the co-ordinates meant that I decided to call it a day and head back to do what I needed at the Church. I’d got the bit of exercise, which was the point anyway, even if I didn’t find both caches. I’ll head back another day when hopefully the geometry of the satellites will be such that I can get a better fix on the location.